Preparing for Java and Spring Boot Interview?

Join my Newsletter, its FREE

Tuesday, September 12, 2023

Difference between Singleton Pattern vs Static Class in Java? Example

Singleton pattern  vs  Static Class (a class, having all static methods) is another interesting questions, which I missed while blogging about Interview questions on Singleton pattern in Java. Since both Singleton pattern and static class provides good accessibility, and they share some similarities e.g. both can be used without creating object and both provide only one instance, at very high level it looks that they both are intended for same task. Because of high level similarities, interviewer normally ask questions like, Why you use Singleton instead of Static Methods, or Can you replace Singleton with static class, and  what are differences between Singleton pattern and static in Java. I

n order to answer these question, it’s important to remember fundamental difference between Singleton pattern and static class, former gives you an Object, while later just provide static methods. Since an object is always much more capable than a method, it can guide you when to use Singleton pattern vs static methods.

In this Java article we will learn, where to use Singleton pattern in Java, and when static class is better alternative. By the way, JDK has examples of both singleton and static, and that too very intelligently e.g. java.lang.Math is a final class with full of static methods, on the other hand java.lang.Runtime is a Singleton class in Java. 

For those who are not familiar with Singleton design pattern or static class,  static class is a Java class, which only contains static methods, good examples of static class is java.lang.Math,which contains lots of utility methods for various maths function e.g. sqrt(). While Singleton classes are those, which has only one instance during application life cycle like java.lang.Runtime.

When to use Static Class in place of Singleton in Java

Indeed there are some situations, where static classes makes sense than Singleton. Prime example of this is java.lang.Math which is not Singleton, instead a class with all static methods. Here are few situation where I think using static class over Singleton pattern make sense:

1) If your Singleton is not maintaining any state, and just providing global access to methods, than consider using static class, as static methods are much faster than Singleton, because of static binding during compile time. 

But remember it's not advised to maintain state inside static class, especially in concurrent environment, where it could lead subtle race conditions when modified parallel by multiple threads without adequate synchronization.

You can also choose to use static method, if you need to combine bunch of utility method together. Anything else, which requires singles access to some resource, should use Singleton design pattern.

Difference between Singleton vs Static in Java

This is the answer to our second interview question about Singleton over static. As I said earlier, the fundamental difference between them is, one represents an object while the other represents a method. Here are few more differences between static and singleton in Java.

1) Static class provides better performance than Singleton pattern, because static methods are bonded on compile time.

2) One more difference between Singleton and static is, ability to override. Since static methods in Java cannot be overridden, they leads to inflexibility. On the other hand, you can override methods defined in Singleton class by extending it.

3) Static classes are hard to mock and consequently hard to test then Singletons, which are pretty easy to mock and thus easy to test. It’s easier to write JUnit test for Singleton than static classes, because you can pass mock object whenever Singleton is expected, e.g. into constructor or as method arguments.

4) If your requirements needs to maintain state than Singleton pattern is better choice than static class, because
maintaining  state in later case is nightmare and leads to subtle bugs.

5) Singleton classes can be lazy-loaded if its a heavy object, but static class doesn't have such advantages and always eagerly loaded.

6) Many Dependency Injection frameworks manages Singleton quite well e.g. Spring, which makes using them very easy.

These are some differences between static class and singleton pattern, this will help to decide between two, which situation arises. In next section we will when to choose Singleton pattern over static class in Java.  You can further see these Java design pattern courses to learn more about various design patterns in Java. 

Difference between Singleton Pattern vs Static Class in Java? Example

Advantage of Singleton Pattern over Static Class in Java

Main advantage of Singleton over static is that the former is more object-oriented than latter. With Singleton, you can use Inheritance and Polymorphism to extend a base class, implement an interface and capable of providing different implementations. 

If we talk about java.lang.Runtime, which is a Singleton in Java, call to getRuntime() method return different implementations based on different JVM, but guarantees only one instance per JVM, had java.lang.Runtime a static class, it’s not possible to return different implementations for different JVM.

That’s all on the difference between Singleton and static class in Java. When you need a class with full OO capability, chose Singleton, while if you just need to store a bunch of static methods together, then use static class.

Other Java Design Pattern Tutorials from Javarevisited Blog


Anand Pritam said...

I Disagree with following :
2) One more difference between Singleton and static is, ability to override. Since static methods in Java cannot be overridden, they leads to inflexibility. On the other hand, you can override methods defined in Singleton class by extending it.

Here the author say you can override methods defined in Singleton.Isn't it breaking Singleton.


Hi Javin Gr8 article , I want to add two things...

1) Singleton class can be extended. Polymorphism can save a lot of repetition.
2) A Singleton class can implement an interface, which can come in handy when you want to separate implementation from API.
3)Singleton can be extended. Static not.
4)Singleton creation may not be threadsafe if it isn't implemented properly. Static not.
5)Singleton can be passed around as an object. Static not.
6)Singleton can be garbage collected. Static not.
7)Singleton object stores in Heap but, static object stores in stack
8)We can clone the object of Singleton but, we can not clone the static class object
9)Singleton class follow the OOP(object oriented principles) but not static class
10)Another advantage of a singleton is that it can easily be serialized, which may be necessary if you need to save its state to disc, or send it somewhere remotely.

The big difference between a singleton and a bunch of static methods is that singletons can implement interfaces (or derive from useful base classes, although that's less common IME), so you can pass around the singleton as if it were "just another" implementation.

Javin @ Must Override Eclipse Error said...

@Saral, Good points. On same note, Static class are good for utility classes, which doesn't maintain state and not required to be extended.

Tavi said...

I would agree with Anand in that most definitions consider extending a Singleton as breaking the definition... Likewise for cloning and serialization...

Also, since one can use/pass around between threads the Singleton instance, any mutable state it might have makes the object susceptible to race conditions as well...

The fact that "a Singleton follows the OOP principles" is utterly irrelevant since in order to really implement the pattern we have to renounce most of the OOP principles and flexibility anyway...

Moreover, having static classes/methods means less parameters to a method that needs this (static or singleton) functionality, eventually less injection, etc. so basically reduced "interfaces" which is normally good. However, this "lack of dependencies" might tend to hide things, introduce magic behavior and inflexible design. Hence, we get to the only situation and strong point (that Saral made and) that could favor a Singleton: implementing an interface and being passed around as just one of the possible implementations...

Unknown said...

I cant understand the discussion. Singleton it is a design pattern with a specific purpose, having just on single instance of a class. You can achieve that with different forms in Java: Enumerator and static classes. Within these forms you can use: Lazy Initialization, Eager Initialization, static block Initialization and the Enum way.
So, its not a question of difference, but when to use one or another or both.

Javin @ how classloader works said...

@Jose Cruz, Thanks for your comment, yes ultimately it comes down to, when to use Singleton and Static class. There are situations like implementing Interface, being part of a type hierarchy where Singleton fits better than static classes, but if you just have some utility methods, wrapping them in static class is better.

Anonymous said...

I can think of a situation when many classloaders are around and we wish to make a class singleton, in that case having a static class will not solve the problem as the class may have been loaded by number of classloaders, this happen all the time in web application servers. To protect this behaviour, classloader safe implementation of Singleton class is a must. Just think about a STATIC ConnectionPool object in a web server, if each of the application using its own classloader may potentially create its own connection pool object!!

Avtar said...

Hello Javin, What is difference between Singleton and Factory pattern? Doesn't Singleton is a kind of factory e.g. getInstance() method returns an instance of Singleton rather than client creating instance using new() operator? doesn't this is similar to Factory method pattern? I would say Singleton is a combination of Factory method + job to keep Singleton as Singleton

Vaishak said...

How can you extend a singleton class having a private constructor? There is no question of overriding the methods in a Singleton class because INHERITED instance methods can only be overridden. Nevertheless, a singleton class may override methods inherited from some other class.

Unknown said...

Nice articles.. But In Difference between Singleton vs Static in Java
2nd Point..
How can a class extend Singleton class...if its constructor is private...
Please correct it..

Raistlic said...

Hi Javin, I disagree with a few points here:

1 - If something maintains states, then making it a singleton is just as bad as maintaining states in static environment. You will face the same complexity if it is accessed in a multi-thread environment.

and when being stateless (or immutable) :

2 - Singleton can be lazy-instantiated: most of the time, this is a 'fake pro', because for most of the singleton classes, the first time you refer to its class name is to call its (static) getInstance() method, which means, most of the time it is instantiated when its class is loaded, which makes whatever 'lazy-instantiation' technic you use inside the getInstance() method pointless.

3 - 2 is true unless the class provides other services via other static methods(in which case you got other reasons to refer to its class name than calling getInstance() method) : but would you do that? most likely no, because why provide half the services via the singleton instance, while the other half via static methods?

4 - Singleton can be overridden: By definition, singleton is one type of 'instantiation control' (it is the one that maintains only one instance), otherwise you cannot enforce it be a singleton, and (other than using enum), the way to achieve instantiation control is to hide its constructor, which means, making its constructor private, ---- which means, you cannot extend the class outside the class itself (you can extend it in its own static member class). Which means, if you want to alter its internal implementation, -- you will need to modify the class itself. If you can modify the class, -- you can just modify the behaviour of a static method as well, the only promise you published when using a static method is its signature.

There is one thing I agree with: singleton is an object, an object is better/more flexible than a static method.

So what exactly makes an object more powerful than static methods? -- It can be passed around.

If you hard code the logic of getting a singleton instance EVERYWHERE in your business logic: Singleton.getInstance().somethod(...), then it is JUST AS EVIL AS XXXUtility.somemethod(...).

The right way of using singleton, I believe, is that you define the services a singleton provides as an interface, and use the interface in your business logic classes; then you define your singleton as to implement the interface, call Singleton.getInstance() in one place, and provide the instance to your business logic objects where it's needed.

In short, you gain the power of an object by DECOUPLE ITS INSTANTIATION LOGIC AND YOUR BUSINESS LOGIC, and this is one main reason frameworks such as Spring exist for. Otherwise it makes no difference whether you use a singleton pattern or use static methods, -- they are just equally bad.

Vivek said...

More differences -

Serialization - Static members belong to the class and hence can't be serialized.
b. Though we have made the constructor private, static member variables still will be carried to subclass.
c. We can't do lazy initialization as everything will be loaded upon class loading only.

Unknown said...

I believe that this is not about the static class but class with static method , sometime it's make me confused.
please let me know if i am incorrect.

Anonymous said...

The "pros" mentioned here I have never encountered in my 10 years of programming. Contrived

Anonymous said...

An important point to note is about garbage collection. If you want to keep memory low and efficient, a singleton can be garbage collected - as it is an object. But a static class or static method can lead to unnecessary memory usage and even memory leaks.

CoolMagma said...

warning Static Class IS NOT a class having all static methods

javin paul said...

@CoolMagma, could you please elaborate your statement, I think for all practical purpose in Java, a class is said static (not formally but popularly) if it only contains static utility methods.

hearvishwas said...

How can you extend Singleton class as it has private constructor

Anonymous said...

Point number 5 in java 8 functions can be passed as parameter

Unknown said...

Singleton class make its constructor private, so our class will be extended any another class

Unknown said...

"2) One more difference between Singleton and static is, ability to override. Since static methods in Java cannot be overridden, they leads to inflexibility. On the other hand, you can override methods defined in Singleton class by extending it.

Read more:

You can't extend Singleton class since it has private constructor.

Meharaj Fareedy said...

Normal class can't be a static only nested class can be a static.

Post a Comment